top of page

Jeff Rowland Research Model 7

SOLD

- €

We're glad to offer an undisputedly excellent monoblock amplifiers from Jeff Rowland.

They are in very good conditions considering their age, they had just a single owner that treated them very well.

The original packaging are on arrival, wooden crates, they were too big to fit in the car.


Herin below some features and specs to give you an idea of what we're talking about.  


Model 7 Features

- Lack of overall or nested negative feedback eliminates time domain distortion.

- Proprietary distortion canceling techniques minimize amplitude related distortions.

- Each transistor individually tested and matched for optimum operating characteristics.

- Constant output impedance is maintained over the entire audio range, allowing for universal compatibility with associated equipment.

- The large number of high-speed bipolar output transistors provides uncompromising reliability and eliminates the need for electronic protection circuitry.

- A single voltage amplification stage utilizes field effect transistors (operating in transconductance mode), which increases low-level signal recognition.

- The absence of capacitors, inductors, fuses and protection circuitry throughout the signal path eliminates the adverse effects of these devices.

- A specially designed toroidal power transformer is supported by the substantial output stage capability.

- All critical circuitry is encapsulated in a thermally-conductive epoxy to ensure excellent thermal stability, mechanical integrity and to facilitate ease of service.


Model 7 Specifications

Output power

350 watts RMS continuous, 8 ohms

700 watts RMS continuous, 4 ohms

1100 watts RMS continuous, 2 ohms

Power Bandwidth

0.15 Hz to 175 kHz, -3 dB

Slew Rate

50 volts per microsecond

THD and Noise

Less than .015%, 1 kHz, 8 ohms, 20 watts

Less than .045%, 1 kHz, 8 ohms, 100 watts

Less than .06%, 1 kHz, 8 ohms, 200 watts

Damping Factor

Greater than 300, 20 Hz to 20 kHz, 8 ohms

Greater than 90, 100 kHz, 8 ohms

Output Current

50 amps peak, continuous

150 amps peak, 0.1 ohm, 20 msec, 1 kHz

Overall Gain

26.4 dB

Sensitivity

136 mV, 1 watt, 8 ohms

Input Impedance

Selectable: 100k, 20k, 600 ohms

Power Requirements

100V-240V

Dimensions

19 in. W x 8.75 in. H x 24 in. D

48 cm W x 22 cm H x 61 cm D

Damping Factor

Greater than 120, 20 Hz to 20 kHz, 8 ohms

Greater than 80, 100 kHz, 8 ohms

bottom of page